Innokin iTaste Kroma TC 75W 2000mAh Kit

Price: £57.99

(0) - See Reviews

Please select your options to purchase

In Stock



Full Description

The Innokin iTaste Kroma TC 75W 2000mAh Kit is an ideal starting point for vapers wanting to try Sub Ohm Vaping for the first time. It comprises of the Innokin iTaste Kroma Mod/Battery and the Innokin Slipstream Tank.

The Kroma Mod is a 75 Watt mod with variable wattage and temperature control capabilities. It has a built-in 2000mAh battery which should last you roughly one full day of vaping. This may vary depending on how frequently you use it and what power (wattage) you have it on. Higher wattages (25W+) will drain the battery quicker. An OLED screen displays all of your essential information/settings such as wattage (or temperature if in temperature control mode), atomiser resistance, battery life and even a puff timer to tell you how long you've taken each puff for. The mod is very easy to use, with plus and minus (+ & -) buttons to adjust your wattage/temperature to your desired setting. Simply hold down either the plus or minus button until your wattage/temperature starts flashing, then proceed to press the plus or minus button to alter the setting. To switch between Wattage and Temperature Control modes, hold down the firing button and plus (+) button simultaneously until the setting on the screen switches. Like a lot of Innokin products, the Kroma Mod utilises a traffic light battery level system. This means that when you hold down the firing button to vape, it will light up red, amber or green depending on how much charge it has left (red for low, amber for moderate and green for high). The same traffic light system takes place when the mod is on charge.

The Innokin Slipstream Tank is a 2ml Sub Ohm Tank. It is a top-filler so you don't have to worry about taking it off your battery/mod to fill it! You also change the atomiser from the top, so again there's no need to take your tank off your battery! It has a child-lock top, so you have to push down and twist the top to take it off to fill it or change the atomiser. There is a 'Max' line on the side of the tank, so make sure you do not fill it past this point because when you put the top back on the E-Liquid level will rise. The Slipstream has adjustable airflow at the top which you can open to provide an easier, more 'airy' draw or close to create a tighter, more difficult draw. The tank comes with a pre-installed 0.8 Ohm coil which can be used on around 15W-30W, as well as a spare 0.5 Ohm coil which can be used on around 20W-40W. The Slipstream has 510 threading on the base and has a replaceable 510 drip tip/mouth piece which you can change if you wish.

The Kroma Mod and the Slipstream Tank fit hand-in-hand due to the Kroma Mod's inset threading. This means the part of the mod that the tank screws in to is actually not on the surface, so the Slipstream fits neatly into the gap to create a more compact looking setup. If you at any point decide to get a different tank, the kit comes with an adapter to flatten out the inset threading and make the Kroma compatible with all 510 tanks.

Innokin Kroma Mod Features:

-Wattage Range: 6W - 75W

-Temperature Range: 150°C - 315°C

-Temperature Control Atomiser Range: Nickel (Ni) 0.1Ω - 0.2Ω / Titanium (Ti) 0.1Ω - 0.5Ω / Stainless Steel (SS) 0.2Ω - 1.0Ω

-Battery: Built-in 2000mAh

-Screen: OLED Screen

-Threading: 510 (inset for Slipstream Tank with adapter for other tanks)

-Charging: Micro USB Charge port

-Protection: 15 second cut off, short circuit and overheat protection

Innokin Slipstream Tank Features:

-Capacity: 2ml

-Material: Pyrex Glass and Stainless Steel

-Drip Tip: Removable Wide Bore 510 Drip Tip

-Airflow: Adjustable Airflow

-Filling: Top Filling (child locked), max line on side of tank.

-Coil Change: Top coil change (child locked)

-Threading: 510

Kit Contents:

-Innokin iTaste Kroma Mod

-Innokin Slipstream Tank (pre-installed 0.8Ω atomiser)

-Spare 0.5Ω atomiser

-Threading adapter for Kroma mod

-Micro USB Charging cable

-Pack of spare seals for Slipstream

-User manual


All UK orders over £30 Will qualify for FREE NEXT WORKING DAY SHIPPING.

NEXT WORKING DAY courier £3.99 (NI, Highlands, and Scottish Islands may take longer) Orders placed after 3pm will be despatched on the next working day!

Working days are Monday to Friday. Orders placed Before 3PM on Friday will be delivered on Monday, except where premium 'Saturday Delivery' is selected and paid for. Orders placed after 3PM on a Friday, on a Saturday or on a Sunday will be despatched on Monday, and should be delivered on Tuesday.

We can now ship to Jersey and Guernsey. The cost is £17.99. However this will be offset somewhat by the fact that customers in the Channel Islands DO NOT pay VAT on our goods. The prices without the 20% VAT will be shown once you log into an account registered to a Channel Island address.

If you place a small order that doesn't contain E-Liquid, we reserve the right to send some orders out via Royal Mail 1st class signed.

PLEASE NOTE: Whilst we do use a Next Day courier, this is not a guaranteed service. 99% of parcels, to mainland England, do arrive on the next 'working' day, however sometimes parcels take longer. Particularly if the delivery address is not in England. Also around public holidays, the courier may need extra time to clear back logs. Please order in advance, and allow plenty of time for delivery to cover any risk. If your parcel has not arrived after 5 working days, then please feel free to get in touch with us.