Aspire ET-S BVC Clearomiser
Aspire ET-S BVC Clearomiser
-Bottom Coil Change
-1.8 Ohm BVC Coil pre-installed (1.6 Ohm & 2.1 Ohm coils also compatible)
The Aspire ET-S Clearomiser is the Stainless Steel version of the Aspire ET Clearomiser. It comes with a stainless steel casing for that extra bit of protection and durability. It is an eGo threaded E-Cigarette tank with a BVC dual coil/atomiser to improve flavour, vapour and throat hit. The BVC (Bottom Vertical Coil) is the newer style of atomiser for Aspire Clearomisers which has four large holes around the coil to allow as much liquid into the cotton as possible to prevent dry/burnt tasting hits. The inner part of ET-S tank underneath the steel casing is made of pyrex glass and has a 2ml E-Liquid capacity. To fill the ET-S Clearomiser, simply unscrew the base (the steel section under the 'Aspire' logo), tip the clearomiser upside-down and pour in your E-Liquid down the side of the tank to the top of the small centre tube. Avoid getting liquid in this tube as any liquid in this will result in it pouring out of the mouth piece. An easy way to avoid the tube is by holding the clearomiser at a slight angle while pouring your E-Liquid down the side. After filling the ET-S, screw the base back on and leave it to stand for a good 10 minutes to allow the E-Liquid to properly soak into the cotton inside the coil. If the cotton has not soaked up the liquid properly, when you go to use the clearomiser the cotton will burn and the coil may be ruined. The coil is the small cylindrical component that is attached to the base of the tank when you unscrew it. This is a disposable item that can last anywhere between 3-15 days depending on how much it is used (most people get around 7-14 days out of each one). After days of usage, when you begin to get a burning taste from your E-Liquid it is time to change your coil. Unscrew your base, unscrew the coil from the base and then screw on a new one. When you put this back in the clearomiser remember again to leave it to stand/soak for 10 minutes to allow it to absorb the E-Liquid. The coils for the ET-S Clearomiser are purchased separately. These are £2.49 each or you can get a pack of five for £10. These can be found below:
Individual coils can be purchased here.
Packs of five coils can be purchased here.
All UK orders over £30 Will qualify for FREE NEXT WORKING DAY SHIPPING.
NEXT WORKING DAY courier £3.99 (NI, Highlands, and Scottish Islands may take longer) Orders placed after 3pm will be despatched on the next working day!
Working days are Monday to Friday. Orders placed Before 3PM on Friday will be delivered on Monday, except where premium 'Saturday Delivery' is selected and paid for. Orders placed after 3PM on a Friday, on a Saturday or on a Sunday will be despatched on Monday, and should be delivered on Tuesday.
We can now ship to Jersey and Guernsey. The cost is £17.99. However this will be offset somewhat by the fact that customers in the Channel Islands DO NOT pay VAT on our goods. The prices without the 20% VAT will be shown once you log into an account registered to a Channel Island address.
If you place a small order that doesn't contain E-Liquid, we reserve the right to send some orders out via Royal Mail 1st class signed.
PLEASE NOTE: Whilst we do use a Next Day courier, this is not a guaranteed service. 99% of parcels, to mainland England, do arrive on the next 'working' day, however sometimes parcels take longer. Particularly if the delivery address is not in England. Also around public holidays, the courier may need extra time to clear back logs. Please order in advance, and allow plenty of time for delivery to cover any risk. If your parcel has not arrived after 5 working days, then please feel free to get in touch with us.