Vaporesso Swag PX80 Showcase
Welcome back to our blog page! Yes, it has been a minute but with the curren...
Read MoreVoopoo Argus Pro Pod Kit
After their success with the Drag series and Vinci range, Voopoo brings you the Argus Pro. This is a 3000mAh pod mod kit which uses the PnP coils, just like the Drag Refresh and the Vinci.
The wattage range of the Argus Pro is 5w-80w and also uses a Type-C charge port with a 2A charge rate meaning it'll charge quicker than the standard micro USB cable.
The Argus Pro comes with a couple of operating modes which include:
- Smart mode: Auto-detects what wattage you should be vaping depending on the coil (Represented by an "S")
- RBA Mode: Fully adjustable from 5w-80w (Represented by an "R")
- Manual Mode: Manual mode only - press the button to power the device (Represented by a "P")
- Double Ignition Mode: Allows the user to take a draw without pressing the button to power the device. The device can still be powered with the button (Represented by an "A&P")
The Argus Pro kit comes with the Drag PnP Pod Tank which you might have seen on the Drag X & Drag S! The tank comes with smooth airflow control and a push-fit system to install coils. To do this, simply remove the pod from the base of the device by pulling from the mouthpiece, then remove the coil and install a new coil via the push-fit system. To fill the tank, remove the pod from the base and open the rubber bung to reveal a fill hole. Top up with juice and away you go!
Replacement coils can be found HERE
Replacement Pods can be found HERE
Contents:
1 x Voopoo Argus Pro device
1 x PnP Pod
1 x VM6 0.15ohm PnP coil
1 x VM1 0.3ohm PnP coil
1 x USB Type C Cable
1 x User manual
Welcome back to our blog page! Yes, it has been a minute but with the curren...
Read MoreThis week we will be looking at the Argus Pro Kit from Voopoo. We know Voopoo f...
Read MoreGood day, and welcome back to another blog post. This week we will be looking a...
Read More