Welcome back to our blog page! Yes, it has been a minute but with the curren...Read More
Welcome back to our blog page!
Yes, it has been a minute but with the current climate, I’ve unfortunately been quite busy! Nevertheless, we are back with a vengeance!
Vaporesso Swag PX80 Showcase
This week’s showcase is on the Vaporesso Swag PX80!
Specifications and Box Contents:
|Cartridge capacity: 2ml (TPD)
|1 x SWAG PX80 mod
|Charging: Type-C 5V/2A
|1 x SWAG pod (2ml)
|Battery: External 18650
|1 x GTX 0.2-ohm mesh coil
|Output wattage: 5-80 watts
|1 x GTX 0.3-ohm mesh coil
|Display: 0.96-inch OLED TFT Screen
|1 x Type-C USB cable
|1 x User manual
1 X Warranty card
1 x Reminder card
The Swag PX80 is a single 18650 pod mod with the capability of running up to 80W max output.
The device has a 0.96 inch thin-film-transistor (TFT) screen hidden behind the carbon fiber panel. This means the screen blends seamlessly behind the carbon fibre pattern on the device; when it’s off you cannot tell a screen is present. When you turn it on the screen appears behind the carbon fiber pattern with crystal clear clarity (see image below).
Operating modes included on this device are wattage, voltage, and smart wattage. Smart Wattage is used to automatically set your wattage depending on the resistance of the coil). There is also a daily puff history over your last seven days with the ability to reset it, as well as the ability to change the colour of the screen between green, blue, and pink. The screen displays the wattage, a puff counter, a battery meter, resistance, and the recommended watts for the coil installed which is a great feature.
To access these options, press the ‘+’ & ‘-‘ buttons at the same time. Then use the same buttons independently to navigate the menu. Press the fire button to select your desired option.
The kit comes with the Swag Pod which uses the GTX coils. The coil range is great for any user, from 0.2ohm to 1.2ohm, there’s something in this range for everyone.
To change the coil, be sure to turn the drip tip to the unlock setting by rotating the drip tip. From there you can push down the drip tip to push the coil out, this will also close the juice inlets meaning you won’t lose any e-liquid as you change the coil. I must admit I was very impressed by the way this works.
This ‘change your coil with a full tank of juice’ feature is a massive plus for anyone as it’s always the worst feeling when your coil burns out with a full tank and you have to get rid of it all.
The video below is a demonstration on how to install and change coils for the Swag Pod:
The coils in the kit are the 0.2ohm, which runs between 45-60W, and the 0.3ohm running between 32-45W.
Since these are the same coils for some of the other devices by Vaporesso (such as the Target PM80), I personally know how they perform (which is incredibly well) so expect big things from them here. I prefer the 0.3ohm to the 0.2ohm as the flavour is a lot crisper which is what I look for when it comes to coils. Plus, for a pod kit it’s more the sort of wattage range I stick to.
Overall, I feel that the Swag PX80 is an exceptional kit for anyone looking for a compact kit that can do both direct-lung (DL) and mouth-to-lung (MTL) vaping. MTL coils are sold separately – two DL come with the kit.
I can’t really see any negatives on first impressions with this mod, so if it performs as well as former Vaporesso mods do with these coils, we’re in for a treat! I maybe would have liked to see a top fill system as we’ve seen with the Aegis Boost or the Innokin Kroma-Z kits but these are minor in comparison to the positives with this kit.
If you are interested, make sure you grab one today whilst stocks last.
Thank you for reading.
Want to see more from us? Check out our social media pages by clicking the icons below!