Vaporesso Swag PX80 Showcase
Welcome back to our blog page! Yes, it has been a minute but with the curren...
Read MoreInnokin Prism T20S 2ml Tank
The Innokin T20S tank is a 2ml, top filling from Innokin that takes the Prism S coils and is a good tank for both new starters and experienced vapers. The T20S comes with a pre installed 0.8 Ohm coil which is perfect for a strong hit and more vapour production. When it comes to changing the coil, make sure there is either no juice left in the tank or that you have some tissue ready; if there is any juice left in the tank when you remove the coil, this juice will pour out. To change the coil, unscrew the base of the tank, pull out the coil from the bottom and replace with a new, making sure the grooves on the coil match up with the grooves on the bottom of the tank so that the tank seals properly and doesn't leak, then screw the base of the tank back on. Always leave at least 10 minutes for the oil to soak up enough juice so that it doesn't dry burn. To fill the T20S, unscrew the top cap and fill around the outside of the coil, not down the centre, and replace the top cap. Always fill the T20 S with the coil inside otherwise the liquid will pour straight out of the bottom.
The mouthpiece is removable by simply pulling it out and the T20 S comes with a spare top cap; to change this simply unscrew the one on the tank and replace with the one in the box.
Packs of 5 coils can be purchased separately here for £9.99.
Innokin Prism T20S 2ml Tank Features:
Capacity: 2ml
Coil: 1.5 Ohm Prism S atomiser pre-installed
Coil Change: bottom coil change.
Fill: Top Filler
Threading: 510
Material: Stainless Steel & Pyrex Glass
Welcome back to our blog page! Yes, it has been a minute but with the curren...
Read MoreThis week we will be looking at the Argus Pro Kit from Voopoo. We know Voopoo f...
Read MoreGood day, and welcome back to another blog post. This week we will be looking a...
Read More