Vaporesso Swag PX80 Showcase
Welcome back to our blog page! Yes, it has been a minute but with the curren...
Read MoreThe Innokin iTaste Kroma-A Kit consists of the Innokin Kroma-A Mod and the Innokin Axiom M21 Sub Ohm Tank.
The Kroma-A Mod is a Temperature Control, Variable Wattage 75W Mod with a 2000mAh built in Li-Po battery, a micro USB Charging port and an OLED screen to display all of your essential settings (Wattage, Voltage, Atomiser Resistance, Battery Level and Puff Timer). It operates a 3-click Lock/Unlock safety feature to prevent accidental firing. Click the firing button quickly three times to unlock the device, then when finished vaping quickly click it another three times to lock it. Like most Innokin Mods, the Kroma-A has a traffic light system to indicate the battery level. This means when you hold down the firing button it will light up Green (High), Amber (Medium) or Red (Low) to show how much battery is left. When on charge, the firing button will light up using these colours however when it turns green this does not mean it is fully charged. The light will go off when the mod is fully charged. A USB Charging cable comes with the kit to charge the device. The Temperature Control feature of this mod supports Nickel (Ni), Titanium (Ti) and Stainless Steel (SS) Coils.
The Innokin Axiom M21 Tank is a 2ml Top Filling Sub Ohm Tank with adjustable airflow, 510 threading and a wide bore delrin drip tip. If the drip tip is too wide, there is a spare thinner one that simply pops into the top of the existing one. The Axiom has a pre-installed 0.5 Ohm coil with a recommended wattage range of 20W-35W, as well as a spare 0.65 Ohm coil with a recommended wattage range of 35W-65W. To change the coil, simply unscrew the base and screw off the coil. The kit comes with some spare O-Rings (seals), a spare glass tube and a vape brand to protect the glass.
-Wattage Range: 6W-75W
-Battery Capacity: 2000mAh Built-in Li-Po Battery
-Screen: OLED Screen to display Wattage, Voltage, Atomiser Resistance, Battery Level and Puff Timer.
-Charging: Micro USB Charging Port. Traffic light battery level indicator.
-Chip: Aethon Chip
-Temperature Control: Nickel (Ni), Titanium (Ti) and Stainless Steel (SS) coils.
-Capacity: 2ml
-Filling: Top Filling
-Coil Change: Bottom coil change
-Airflow: 3-slot adjustable airflow
-Atomiser: Pre-installed 0.5 Ohm Atomiser (20W-35W) with 0.65 Ohm atomiser (35W-65W) spare.
-Drip Tip: Wide bore delrin
-Tank Material: Glass tube
-Threading: 510
-Innokin Kroma-A Mod
-Innokin Axiom M21 Tank (Pre-installed 0.5 Ohm Coil)
-Spare 0.65 Ohm Coil
-Spare Glass Tube
-USB Charging Cable
-Vape Band (to protect glass)
-Pack of Spare Seals
-User Manual & Specifications card
Kit Price: £59.99
Welcome back to our blog page! Yes, it has been a minute but with the curren...
Read MoreThis week we will be looking at the Argus Pro Kit from Voopoo. We know Voopoo f...
Read MoreGood day, and welcome back to another blog post. This week we will be looking a...
Read More